The paint systems shown below can be used on XpresSteel buildings’ Panel Rib roof and wall panels, as well as Vee Rib wall panels. The systems deliver enduring protection against chalking and fading so your building surface looks bright year after year. Select a finish and then choose a color. A Galvalume® only finish is also available. Remember, if you desire, you can mix and match roof and panel colors.

KXL combines ceramic pigmentation with polyvinylidene fluoride (PVDF) for superior, long-lasting performance. PVDF finishes are respected for their durability, resistance to chalking or fading, chemical resistance and color retention.

This thermoset coating system is composed of polyester resin. The SP finish offers good protection from the elements along with chalk, fade and chemical resistance.

All colors shown approximate actual paint colors as accurately as possible. Actual paint colors may vary. Colors in this guide are for reference only. XpresSteel reserves the right to change color offerings contained in this guide without notice.
XpresSteel buildings use high-quality paint systems designed to provide long-term performance and protection. Each coating is formulated with thoroughly researched, tested and field-proven pretreatments, primers, resins and pigments. For detailed test results by independent associations, consult the following table.

(click for larger image)
1. Note: In all cases nominal numbers are indicated.
2. American Society for Testing and Materials.
3. A Galvalume® only finish is also available.
4. Fracturing or rupturing of substrate will rupture coatings. KXL Coatings are generally flexible to point of substrate rupture.
5. American Architectural Manufacturers Association.
6. Hunter ΔE color difference.
7. No objectionable color change.
8. Less than 1/16" creep from scribe.
9. No field blisters.
10. Less than 1/8" creep from scribe.
Note: Oil canning in the flat areas of panels is inherent of coil steel products and shall not be cause for product refusal.

KYNAR® is a registered Trademark of Atochem North America, Inc.

HYLAR 5000® is a registered trademark of Ausimont USA, Inc.

Galvalume® is a registered trademark of B.I.E.C. International, Inc.

Certification of Corp. Engineers and AAMA 605.2 available upon request.

 
Home  |  Ultimate Buildings  |  Express Buildings  |  Design Capabilities  |  Why Steel?  |  About Us  |  Contact Us